Articles by Argile

Pairing a solar thermal water heater with a gas backup is a simple way to secure comfort without oversizing the system. As a tradesperson, what you mainly need is accurate sizing, a clear hydraulic diagram and good control settings to avoid unnecessary cycling. Here's a rundown of the choices that matter on site, for a solution that's reliable and easy to maintain.

5 min read

On site, nothing beats a field measurement to know whether the air is actually moving as intended. With the right instruments and a simple method, you quickly spot underperforming vents, imbalances between rooms, and common causes like clogging or leaks. The result: you save time on adjustment, and you secure the final quality before handing over the job.

5 min read

Between the street and the living space, a garage or a conservatory can become a real ally. Well placed, this "in-between" zone cuts the wind, limits temperature swings, and eases the load on the heating system, provided you treat sensitive points like junctions, doors, and ventilation. For you, tradespeople, it's a simple angle to build into the diagnosis and the quote, without adding needless complexity.

5 min read

On a job site, choosing a fuel means choosing clear constraints — storage, safety, supply — and ultimately the client's comfort. Between mains gas and cylinders, the right instincts save you from unpleasant surprises, especially when the home is off-grid or space is tight. We sort it out simply, so you can go with the most logical solution, not the most complicated one.

5 min read

With a multi-split system, the right number of indoor units is the one that matches the living spaces and usage patterns, not a one-size-fits-all rule. As a tradesperson, the challenge is simple: cover the right volumes without oversizing, while keeping the installation tidy, accessible and easy to balance. Starting from the floor plan, the gains and the installation constraints, you produce a clear quote and avoid callbacks.

5 min read

When a fireplace smokes at startup, you see it right away on the job site. By simply changing the order of loading and lighting, you get a steadier flame, less smoke, and glass that stays cleaner. A quick tip to explain to the client, one that adds value to your work and cuts down on "poor draft" callbacks.

5 min read

Between insulating and changing the heating system, your clients often hesitate. It is up to you to set the right project logic, to avoid oversizing a heat pump or letting heat loss run away despite a new appliance. By clarifying the order of the work, you secure performance, budget and satisfaction at the end of the job.

5 min read

On a renovation job, correct sizing is what separates a smooth-running project from a string of callbacks. When the machine is too powerful or too marginal, you pay for it with short cycling, discomfort and climbing consumption. By mastering 5 common pitfalls, you secure your quotes and save time from the study phase onward.

5 min read

In an unheated loft, a poorly insulated ventilation duct can quickly cause condensation and airflow loss, followed by service calls you could have avoided. With a few good habits around choosing the insulation, sealing the connections, and routing the ductwork, you secure the job's performance and durability. The idea is to keep air circulating well, with no moisture creeping in where it shouldn't.

5 min read

When a client is torn between a heat pump, a boiler, wood, or a hybrid setup, it's often up to you to turn the building's data into a clear choice, without an endless debate. With a simple grid, you quickly compare constraints, budget, use, and knock-on work, and you can justify your recommendation in black and white. The result: a stronger quote, and a job that starts without any grey areas.

5 min read

Outdoors, insulating a pipe network is often the detail that avoids callbacks. You gain on two fronts: less heat loss, less risk of freezing and condensation, so fewer breakdowns and service calls. With a few good installation and protection habits, you secure performance without adding extra work for your teams.

4 min read

On a job, what makes the difference is a clean, compliant flue, even before you think about finishes. Between the rules to follow, the right diameter and the choice of material, you need to move fast, without improvising. With a few concrete reference points, you secure the installation, avoid rework, and deliver a clean result the first time.

5 min read