Features / On-site design
On-site design
Request a demo
No commitment, 30-minute demo

On a phone, the technician documents the home and the project job by job: surveys, photos, equipment positions and sizing confirmed on the spot, with nothing to re-enter back at the office.
01
A guided flow for every job
impossible to forget a figure the sizing needs
Technical visit
Dwelling
Façades
Ground floors
Upper floors
Heating and hot water
Ventilation
Photovoltaics
Electricity
Add / remove a section
Client project
Sections open according to the works selected, and nothing is confirmed while a figure is missing.
Photos of the visit
3
Photo of the façade
2
Photo of the boiler
1
Photo of the electricity meter
2
Photo of the planned location
Filed with the item they document
02
Surveys and photos attached to the file
facades, rooms, existing systems, future locations
Unit positions
UE
UI
Indoor unit
Outdoor unit
Room
Core drilling
Indoor unit
Outdoor unit
03
Equipment positioned on the plan
right during the visit
Estimated heating demand
18,2 kW
Design temperature −7 °C
Daikin Altherma 3 H HT 18 kW
Output at design temp. 18,0 kW
99 %
Coverage
Calculation confirmed with the client, in the home
04
Sizing confirmed on the spot
the customer is left with a concrete project
What the visit fills in
Technical visit
Heated area
Heat losses
Emitters
Unit positions
Quote
Sizing note
Nothing to retype back at the office
05
Nothing to re-enter
the visit feeds the quote and the sizing report automatically
The site visit, step by step
Heating and domestic hot water
18,2 kW
Leave
Current installation
Future heating
Future hot water
Boiler room
Access to the boiler room
Enough room
Yes
Boiler room dimensions
Unheated room
Floor area
14,40 m²
Volume
34,56 m³
Generator
Main
Gas
Gas condensing boiler
Domestic hot water production
Domestic hot water is produced by the main heating generator.
01
State of the home
Rooms, emitters and existing systems documented on the spot.
Heat pump project
Document the air-to-water heat pump project
1
Zone to heat
2
Rooms & emitters
3
Unit positions
4
Sizing
Heat pump
Air-to-water heat pump
Select the future emitter type
Radiators
Underfloor heating
+
Radiators & underfloor heating
Choose a setpoint temperature
19 °C
Back
Confirm
02
The customer's project
Choice of job and configuration of the future equipment.
Heat pump project
Document the air-to-water heat pump project
Zone to heat
Rooms & emitters
3
Unit positions
4
Sizing
Add at least one indoor unit and one outdoor unit of the future heat pump
UE
UI
Indoor unit
Outdoor unit
Room
Core drilling
Indoor unit
Outdoor unit
Core drilling
3
Photo of the façade
2
Photo of the boiler
1
Photo of the electricity meter
2
Photo of the planned location
Back
Confirm
03
Equipment positions
Units and runs placed on the floor plan, backed by photos.
Technical visit
51 rue de Bel air,
Donnery 45450
Dwelling
Façades
Ground floors
Upper floors
Heating and hot water
Ventilation
Photovoltaics
Electricity
Add / remove a section
Client project
E
Current state of the dwelling
Works plan
Heating and domestic hot water
18,2 kW
Leave
Heat pump project
Document the air-to-water heat pump project
Zone to heat
Rooms & emitters
Unit positions
4
Sizing
Estimated heating demand
18,2 kW
Design temperature −7 °C
Check of the radiators’ heat output
8,4 kW
Undersized
Low temperature
19,6 kW
Recommended
Medium temperature
32,1 kW
Oversized
High temperature
Daikin Altherma 3 H HT 18 kW
Output at design temp. 18,0 kW
99 %
Coverage
Back
Confirm
04
Sizing
Calculations confirmed and a summary presented to the customer.

“When several teams are involved, everyone needs to work with the same information. Argile helps us standardize our visits and better manage our projects.”
These features should interest you too
The Argile building blocks that pair best with this one, from the survey through to the job site.
Remote design
Remote design
From your desk, qualify the home, sketch the project and give the customer a dependable first estimate before the site visit: you only travel for the projects that are worth it.
Measurements and quantities
Measurements
Your technicians survey the home on a phone, Argile reads the walls end to end, pulls out the wall lengths, the ceiling heights and the floor areas, turns them into quantities per work item and carries them over to the 2D plan, the sizing and the quote, with no double entry.
Customers
/
Camille Martin
Details
Dwelling
Works plans
Quotes
Admin & finance
Quote no. D2026-0042
History
Analysis
Preview
Save
The property
Energy renovation
Information
4
The quote
5
Terms
Next step
The quote
No.
Description
Qty
Unit
Unit price excl.
Total excl.
VAT
Price incl.
1
Installing an air-to-water heat pump
Technical specifications of the heat pump (mandatory)
3 STILL TO FILL IN
Area heated by the heat pump (m²)
e.g. 120
Seasonal energy efficiency ηs (%)
e.g. 126
Controller class
I
II
III
IV
V
VI
VII
VIII
1.1
Installing an air-to-water heat pump
10 600,00 €
11 183,00 €
1.1.1
Air-to-water heat pump 14 kW
1,00
U
3600,00
3 600,00 €
5,5%
3798,00
B
I
U
Heat output +7 °C / +35 °C: 13.00 kW. Heat output -7 °C / +60 °C: 10.10 kW. Seasonal space heating efficiency (35 °C / 55 °C): 150 % / 117 %.
1.1.2
Heat pump fitting and commissioning
1,00
U
7000,00
7 000,00 €
5,5%
7385,00
Add a line
2
External wall insulation (EWI)
2.1
External wall insulation (EWI)
22 500,00 €
23 737,50 €
2.1.1
Polystyrene insulation, R of 3.7 m².K/W or above
120,00
M2
120,00
14 400,00 €
5,5%
15192,00
2.1.2
Insulation labour package
120,00
M2
75,00
9 000,00 €
5,5%
9495,00
Discount
-900,00 €
8 545,50 €
Quotes
Equipment, labour and accessories come from the works plan, VAT applies line by line, grants are deducted from the amount due and the mandatory wording is already written: the quote goes out for signature without a proofread.
Browse the answers to the most frequent questions. And if needed, our team is here to help.
Contact us
On a phone or a tablet.
One demo, and you see your expertise proven.
Contact us