Articles by Argile

Between what's advertised on the product spec sheet and what actually reaches the rooms, the gap can be surprising, and that's often where your clients have a thousand questions. By breaking heating performance down into 4 complementary levels, you quickly spot where the energy is lost: generation, distribution, emission, control. Enough to cost a gain, explain your choices simply and secure your on-site recommendations.

5 min read

On a job, the right scenario is often the one that holds up on the ground, not the one that ticks every box on paper. With automatic recommendations, you save time sorting through options, comparing impacts, and starting right away with a clear pathway suited to the building and the client's budget. That means more secure proposals, and faster progress without getting bogged down in settings.

5 min read

A poorly treated thermal bridge is often just a few metres of junction ruining an otherwise good insulation job. On site, knowing how to estimate these losses in the right place helps you prioritise rework, justify a solution, and avoid bad surprises at the airtightness test. With a simple method and clear orders of magnitude, you save time and credibility with the client.

5 min read

When you treat a wall, it's not only the insulation thickness that matters. How the surface exchanges heat through radiation can change how a room feels, limit cold-wall effects and improve comfort without adding to the job. Understanding this parameter and its effect on finishes helps you make safer choices, explain things better to the client, and avoid vague promises about the expected 'gain.'

5 min read

When you're estimating heat loss on a project, pitch changes the picture. For the same ground-level footprint, the actual exposed surface area increases, and your measurements, choice of insulation and quantities need to follow. By getting the right factor from the outset, you protect the quote and avoid discrepancies at the end of the job.

6 min read

On site, the real challenge is comfort that holds up over time, not just a fast temperature rise. When you work with wall mass, everyday use and sequential use don't call for the same material choices or the same settings. Handled well, this lever helps you smooth out variations, avoid overheating, and deliver a result that's felt from the first few days.

6 min read

Between what clients call "living area" and what you actually heat, there are often a few square metres of difference. And that gap can change a heat pump's sizing, the choice of emitters, or the cost of insulation. By setting the right calculation method right from the quote, you secure performance, budget, and avoid arguments at the end of the job.

5 min read

When ceiling height changes, your heated volumes change too. And that's often where the sizing of a heating or ventilation system starts to go wrong, both on the quote and on the bills. As a tradesperson, a few simple measurements and a clean volume calculation let you price accurately, compare consumption consistently, and avoid unpleasant surprises at handover.

6 min read

On site, “invisible” thermal bridges can quickly derail a stated performance level. Once you know how to read this coefficient linked to junctions, you can pinpoint where heat is escaping, prioritise fixes, and keep your calculations and quotes reliable. In short, it's a small number that prevents big surprises at testing or handover.

5 min read

On site, an accurate diagnosis and correct sizing are what save you from callbacks, repeated adjustments and runaway energy bills. Taking the time to ask the right questions, floor area, insulation, usage patterns, emitters, secures your equipment choice and your commissioning. The result: an installation that keeps its promises, and a reputation that follows.

5 min read

On site, a wall’s U-value is often what separates a solution that “just about works” from one that truly holds up. As a tradesperson, you need a fast, reliable calculation, even when the wall composition changes from room to room or you have to choose between two thicknesses. Here we show you a simple method, with clear tables, to get a clean U-value without spending the whole evening on it.

6 min read

On your projects, the real challenge is moving fast without missing a compliance point that could cost you a client callback or a file to redo. With Argile, you keep a clear method, well-organized evidence and reports ready earlier, even when the day is packed. Less time spent hunting for information, more peace of mind when you have to justify every choice. And you move forward with a solid organization, without weighing down your daily routine.

5 min read