Articles by Argile

On site, the choice of material for distributing heat can either save you hours or cost you them. Steel, copper or PEX each have their own installation habits, points of caution, and contexts where they become the best fit. By clarifying the home's constraints and your installation practices, you secure a clean, durable result that's easy to maintain.

5 min read

When summer heats up, your clients want to stay cool without blowing the budget or installing air conditioning everywhere. By first relying on simple, well-installed solutions, solar protection, managing heat gains, night ventilation, you gain comfort from the first hot days and add value to your job. And if air conditioning eventually becomes useful, it comes in as reinforcement, not a patch.

5 min read

When a heating circuit fills up with sludge and micro-bubbles, breakdowns pile up and you lose time on callbacks. A well-sized, well-installed filtration and degassing device secures circulation, protects the pump and stabilises performance. The result: you deliver a more reliable installation, and your clients feel it from the first few days.

5 min read

In renovation, the choice of heating distribution layout changes everything: balancing between emitters, commissioning time, and room-by-room comfort. On an occupied job, one solution can limit rework and bleeding, while the other makes fine-tuning and future upgrades easier. As a tradesperson, your initial diagnosis saves hours and prevents callbacks.

5 min read

On a job site, what matters is knowing when the investment actually starts paying off. Between insulation, heating and ventilation, you need a simple method to quantify the savings, factor in subsidies and set clear assumptions over 10 or 15 years. With a rigorous approach, you protect your quotes and can talk budget with your clients without ambiguity.

5 min read

In a timber-frame house, everything happens fast. Solar gains climb sharply, then the temperature drops as soon as the sky clouds over or night falls. As a tradesperson, you can smooth out these swings with simple choices in design, materials, and settings, without adding weight to the job.

5 min read

When you redo a bathroom or a heating network, the choice of tube changes everything. You want a material that bends quickly, connects cleanly and limits callbacks. With the right fittings and careful installation, you save time, and your client gains reliability, without blowing the budget.

5 min read

On a job site, a lot is decided in what you don't see right away. The right 'mass' in a wall or a floor can smooth out heat spikes, limit heating jolts, and improve comfort without complicating the installation. As a tradesperson, you get to choose where to place it, and above all, when it becomes a real gain rather than a constraint.

5 min read

When your clients complain about one room being too hot and another too cold, you can take back control without redoing the whole installation. With an adjustable, programmable radiator head, you fine-tune room by room, at the right times, and turn "all or nothing" heating into managed comfort. The result is a cleaner job and added value that's easy to explain.

5 min read

On a job site, every choice matters, not just for energy, but also for the wildlife around the building. You can easily earn points with concrete gestures: preserving the soil, limiting unnecessary lighting, planning simple refuges on facades or roofs. The result: a more pleasant building, and a client who sees the difference right away.

5 min read

Your clients want heating that stands out, without cutting corners on comfort or consumption. It's up to you to find the right balance between look, power and placement, to avoid "nice but lukewarm" or high-performing but impossible to install. With a few simple benchmarks, you can propose a solution that enhances the room and your project.

5 min read

When your clients want to cut their bill without changing all their habits, the electricity-gas duo often ticks the right boxes. You keep stable comfort, you adapt output to cold days, and you offer a solution that works well in renovation, even when the home isn't ready for 100% electric. A way to move forward without setbacks or bad surprises at start-up.

5 min read