Blog/Emailing quotes: get the send right, prove delivery, and follow up effectively
Contractors

November 11, 2026

•

6 min read

Emailing quotes in 2026: uneditable PDF, proof of sending, and follow-up that gets signatures

Send your quote by email with a lightweight, uneditable PDF attachment, ideally between 2 and 5 MB, so it opens smoothly on mobile and is not blocked by email filters, as recommended in ADEME’s practical guide to low-impact digital use. In the subject line and body of the message, remind the client of the site visit date, the job reference, and the quote validity period, then offer the next step straight away (confirmation call or online signature). Keep proof of sending by archiving the email (.eml or .pdf with headers) and schedule the follow-up as soon as you send it, typically on day 2 and then day 7.

Contents

Sending a quote by email: sending is part of the sales cycle, not just “forwarding a PDF”

Choose the right moment: after the site visit, with a clear date and context

To send a quote by email without losing the thread, do it straight after the technical visit. Remind the client of the site visit date, the jobsite address, the relevant package or trade, and your internal reference. The subject line should identify both the project and your company so the quote can be found in 5 seconds in an overcrowded inbox.

Do not leave the quote “pending”. Propose a clear next step in the email itself. A confirmation call, a specific callback slot, or an online signature link. Schedule the follow-up when you send it, and include it in your calendar and client file.

Set the quote validity period and the client’s next steps

State the validity period and what triggers the order: signed return, dated written agreement, or electronic signature. Attach an uneditable PDF with a clear filename, and keep proof of sending in the file, along with delivery confirmation or open tracking if you use it. Also pay attention to file size and mobile readability. If you need to frame the legal and operational side, here is what to do in the event of a signed return without a start date.

Writing a quote email that does not get lost: a subject line that identifies the project + short, useful body copy

Write a precise subject line: client, address, trade, site visit date (and urgency if needed)

To send a quote by email without ending up in spam, your Subject must be readable in one second. Put the client’s name, a short address, the trade (air-to-water heat pump, insulation, ventilation), and the visit date. Add an urgency note only if you genuinely have a dated scheduling slot available.

Keep the message brief: reminder of the visit, key points, and validity period

In the body, remind them of the visit (date, duration) and 2 or 3 points agreed on site. State the validity of the quote, the document version, and attach an uneditable PDF with an explicit filename (Client_Address_Date.pdf). Keep sensitive data to a minimum. Stay factual and GDPR-compliant.

Add one simple action: “reply OK”, request a response, or online signature

End with a single action. “Reply OK to start booking” or “Please confirm your written approval.” If you offer online signature, mention the link and the deadline. Schedule the follow-up when you send the email and archive the message in the client file. For the next step, you can also schedule the follow-up with status labels (sent, seen, followed up, signed) to increase your chances of getting it signed.

Attaching an uneditable PDF: prevent tampering and make it easy to read on a phone

Secure the document: export to PDF, not Word/Excel, and add locks if needed

To send a quote by email, start from your estimating tool and export to PDF. Avoid Word or Excel, which are too easy to edit. If you are sending a sensitive quote or if multiple people are forwarding it around, enable protection. Password on opening, or restrictions on editing and printing. And keep the original in the client file so you can prove which version was sent.

Name the file unambiguously: company + client + address + date + version

A clear filename avoids back-and-forth and confusion. Use a simple format, without accents, and include a version. Example. Company_Client_Address_2026-11-14_V1.pdf. If you work from shared inboxes, replace the full name with a job reference to limit exposure of personal data.

Get the format right: reasonable file size, mobile readability, clear pages, and visible signatures

On a phone, the same issues always cause trouble. PDF too heavy, crowded pages, signatures impossible to find. Aim for a lightweight PDF, readable tables, and a summary page with totals, validity period, and clearly marked signature areas. If the PDF exceeds your email limit, switch to a download link.

Point checked Target (MB) Minimum font size (pt) Images (dpi)
PDF sent 2 to 5 10 150 to 200
Above that, prefer a link 20 to 25

Proof of sending and receipt: protect your file without wrongly assuming “it’s approved”

Keep proof: sent email, attachment, and filing in the client folder

When you send a quote by email, keep usable proof of sending. Archive the message in “Sent”, then export it as .eml or .pdf with its headers. Also file the attachment in the client folder, in a single version, with a dated, unambiguous filename.

  • Uneditable PDF quote, identical to the one sent.
  • Sending metadata preserved (date, addresses, subject).
  • Copy stored in your CRM or server, with restricted access rights.

Delivery receipt and open tracking: what they are worth, and how to use them without getting caught out

Delivery receipts and open tracking provide a signal, useful for managing follow-up, but not for “proving” acceptance. A firewall can block tracking, and a client can open the email without approving it. Use them as triggers, and plan the follow-up as soon as you send it (short call on day 2 or day 3). For practical templates, rely on follow-up messages tailored to each situation.

Remember the rule: sending is not acceptance; only a signature or written agreement is binding

In the email, remind the client that sending does not equal acceptance. Only a handwritten signature, an electronic signature, or a dated “approved” note creates a binding written agreement. Until you have that, do not order materials or reserve a slot. Keep exchanges according to your internal policy, for a retention period that is defensible and GDPR-compliant.

Schedule the follow-up as soon as you send it: the trap to avoid and a simple timeline

Plan it at the time of sending: day 2/day 7 follow-up and a short decision-oriented message

The classic mistake is to send a quote by email and then wait. Schedule the follow-up at the same time as the send, in your calendar or CRM, with a clear goal. On day 2, confirm receipt. On day 7, seek a decision or a date.

Due date (days) Goal Message angle
+2 Confirm receipt Quick check, need for more information
+7 Get a decision Approval, adjustment, or abandonment

Adapt the follow-up to the scenario: “not seen”, “seen but no reply”, “needs competing quote”

  • “Not seen”: resend the PDF with the same filename and ask for a receipt confirmation.
  • “Seen but no reply”: propose two 10-minute call slots to settle any blocking points.
  • “Needs competing quote”: define what is comparable: scope, brands, RGE mentions, terms.

Track everything: log your exchanges and secure client data (GDPR, professional email addresses)

Archive the sent email, follow-ups, and replies in the client file, with date and quote version. Under GDPR, limit recipients, avoid personal inboxes, and apply appropriate security measures (access rights, locked devices, backups). Set a retention period and delete anything that is no longer useful.

Key figures

5 s

to find again

2-3

key points

1

single action

Frequently asked questions

A quote has contractual value as soon as it is accepted, by signed return, dated written agreement, or electronic signature. For proof, keep the email with its headers, the attached PDF, and ideally a delivery receipt or signature trace. For higher-stakes jobs, a qualified electronic signature or secure electronic registered delivery helps protect the date and identity.

Share this article

Louis Airy

Louis is COO of Argile. After four years in strategy consulting and close to two as chief of staff in home adaptation and reuse, he joined Argile in March 2024. In daily contact with certified renovation companies, he follows French energy saving certificates, renovation subsidies and reduced VAT, and revises the affected articles whenever a rate changes. What he writes is what he then checks against real quotes.

Further reading

Customers

/

Camille Martin

Details

Dwelling

Works plans

Quotes

Admin & finance

Quote no. D2026-0042

History

Analysis

Preview

Save

The property

Energy renovation

Information

4

The quote

5

Terms

Next step

The quote

No.

Description

Qty

Unit

Unit price excl.

Total excl.

VAT

Price incl.

1

Installing an air-to-water heat pump

Technical specifications of the heat pump (mandatory)

3 STILL TO FILL IN

Area heated by the heat pump (m²)

e.g. 120

Seasonal energy efficiency ηs (%)

e.g. 126

Controller class

I

II

III

IV

V

VI

VII

VIII

1.1

Installing an air-to-water heat pump

10 600,00 €

11 183,00 €

1.1.1

Air-to-water heat pump 14 kW

1,00

U

3600,00

3 600,00 €

5,5%

3798,00

B

I

U

Heat output +7 °C / +35 °C: 13.00 kW. Heat output -7 °C / +60 °C: 10.10 kW. Seasonal space heating efficiency (35 °C / 55 °C): 150 % / 117 %.

1.1.2

Heat pump fitting and commissioning

1,00

U

7000,00

7 000,00 €

5,5%

7385,00

Add a line

2

External wall insulation (EWI)

2.1

External wall insulation (EWI)

22 500,00 €

23 737,50 €

2.1.1

Polystyrene insulation, R of 3.7 m².K/W or above

120,00

M2

120,00

14 400,00 €

5,5%

15192,00

2.1.2

Insulation labour package

120,00

M2

75,00

9 000,00 €

5,5%

9495,00

Discount

-900,00 €

8 545,50 €

With argile

Flawless quotes, straight from the works plan

Equipment, labour and accessories come from the works plan, VAT applies line by line, grants are deducted from the amount due and the mandatory wording is already written: the quote goes out for signature without a proofread.

ContractorsOctober 24, 2026
Lambda coefficient: choosing the right value for your calculations

The lambda value to use is the one declared or certified for the product actually installed, not an average for its family. The French Th-Bât calculation rules convert it into a design value with a safety factor FR of 1 or 1.15 depending on where the declaration comes from and, where no value can be evidenced, impose default values that penalise the result: 0.055 W/(m·K) for glass wool of unknown density.

7 min read

ContractorsNovember 1, 2026
Quote Follow-Up Examples: 5 Ready-to-Use Messages

A quote follow-up fits in five messages: check receipt on day 2, clear the question holding things up on day 7, offer two start dates on day 14, flag the price deadline before the quote expires, then close the file. Each one brings a new fact and is about the quote the customer asked for, nothing else: in energy renovation, articles L. 223-1 and L. 223-8 of the French Consumer Code ban prospecting by phone, text, messaging apps, email and social networks, except within a contract already in progress, and no text expressly exempts a quote follow-up. Keep a record of the customer's request.

6 min read

Reveal your expertise

One demo, and you see your expertise proven.

Contact us